The Hip-spine Assessment of a Novel Surgical Planning Software Provides Acetabular Component Targets That Are Reliable and in Agreement With Current Clinical Recommendations.

Background: Spinopelvic immobility has been reported to increase dislocation risk following total hip arthroplasty. Surgically placing acetabular components in a functional orientation has been shown to mitigate risk. The aim of this study was to evaluate the validity and reliability of novel surgical planning software to generate clinically recommended cup targets. Methods: Hip-spine assessments were performed retrospectively on 40 patients. Five reviewers, including 3 arthroplasty-trained surgical fellows and 2 clinical research scientists performed the assessments. Hip-spine assessments consisted of measuring anterior pelvic plane tilt, sacral slope, pelvic incidence, and lumbar lordosis on standing anteroposterior pelvis and lateral standing and seated hip-spine images. Generated cup targets and a control group (40°/20° relative to the anterior pelvic plane) were compared to clinically recommended cup targets. Agreement was defined as a cup position within the recommended range or within 3° of a specific target (eg, 40° inclination) when no range was provided. Intraclass correlation coefficients were used to assess interrater and intrarater reliability, and McNemar's chi-square test was used to measure success relative to the control group. Results: The intraclass correlation coefficient was 0.88 for delta sacral slope and 0.92 for pelvic incidence-lumbar lordosis mismatch. For patients with spinopelvic risk factors, the generated targets matched the clinical recommendations in 81% of patients compared to only 16% in the control group. Conclusions: Excellent interrater and intrarater reliability was achieved using the novel surgical planning software. The resultant target values agreed with clinical recommendations to a greater extent than the control group.

Republication of "Osteochondral Lesions of the Talus: Current Concepts in Diagnosis and Treatment".

Osteochondral lesions of the talus (OLTs) are a difficult pathologic entity to treat. They require a strong plan. Lesion size, location, chronicity, and characteristics such as displacement and the presence of subchondral cysts help dictate the appropriate treatment required to achieve a satisfactory result. In general, operative treatment is reserved for patients with displaced OLTs or for patients who have failed nonoperative treatment for 3 to 6 months. Operative treatments can be broken down into cartilage repair, replacement, and regenerative strategies. There are many promising treatment options, and research is needed to elucidate which are superior to minimize the morbidity from OLTs.

Evaluation of Mechanically-Assisted Crevice Corrosion of Different Modular Dual Mobility Constructs.

BACKGROUND: Modular dual mobility (MDM) acetabular component use is rising in total hip arthroplasty. However, concern of mechanically assisted crevice corrosion (MACC) at the shell-liner interface remains. We investigated shell-liner corrosion using retrieval analyses and corrosion chamber testing. METHODS: We analyzed fretting and corrosion on 10 matched pairs of 2 commercial MDM constructs (MDM1 and MDM2). Also, pristine pairs of Ti6Al4V shells and CoCrMo liners from 3 commercial dual mobility systems (MDM1, MDM2, and MDM3) were tested in vitro to model MACC performance. Three pairs of each were placed into an electrochemical chamber with stepwise increasing cyclic compression loads while measuring currents generated at the shell-liner taper. Onset fretting loads and fretting currents were calculated. RESULTS: Corrosion damage scores on retrieved components were low but higher in the MDM2 to MDM1 liners (P = .006), specifically outside the taper region (P = .00003). Fretting currents were higher in the MDM2 than in MDM1 or MDM3 (P = .011). Onset loads were also higher in the MDM2 (P = .001). CONCLUSION: Among retrieved liners, MDM2 tapers seem prone to non-mechanical corrosion modes. Higher onset loads and fretting currents in MDM2 tapers indicate greater MACC resistance but higher severity once corrosion begins. Differences among the devices were likely due to taper design and surface finish. Currents in all 3 were <5 µA, much lower than those observed with head-neck tapers. Our findings suggest that, among the types of corrosion observed in these MDM designs, mechanically driven corrosion may not be the most significant.

Deep Learning Phenotype Automation and Cohort Analyses of 1,946 Knees Using the Coronal Plane Alignment of the Knee Classification.

BACKGROUND: The Coronal Plane Alignment of the Knee (CPAK) classification allows for knee phenotyping which can be used in preoperative planning prior to total knee arthroplasty. We used deep learning (DL) to automate knee phenotyping and analyzed CPAK distributions in a large patient cohort. METHODS: Patients who had full-limb radiographs from a large arthritis database were retrospectively included. A DL algorithm was developed to automate CPAK knee alignment parameters including the lateral distal femoral, medial proximal tibia, hip-knee-ankle, and joint line obliquity angles. The algorithm was validated against a fellowship-trained arthroplasty surgeon. After applying the algorithm in a large patient cohort (n = 1,946 knees), the distribution of CPAK was compared across patient sex and baseline Kellgren-Lawrence (KL) scores. RESULTS: There was no significant difference in the CPAK angles (n = 140, P = .66-.98, inter-class correlation coefficient = 0.89-0.91) or phenotype classifications made by the algorithm and surgeon (P = .96). The deep learning algorithm measured the entire cohort (n = 1,946 knees, mean age 61 years [range, 46 to 80 years], 51% women) in < 5 hours. Women had more valgus CPAK phenotypes than men (P < .05). Patients who had higher KL grades at baseline (2 to 4) were more varus using the CPAK classification compared to lower KL grades (0 to 1) (P < .05). CONCLUSION: We applied an accurate, automated DL algorithm on a large patient cohort to determine knee phenotypes, helping to validate and strengthen the CPAK classification system. Analyses revealed that sex-specific and major bone loss adjustments may need to be accounted for when using this system.

Unexpected high rate of revision of a modern cemented fixed bearing modular posterior-stabilized knee arthroplasty.

AIMS: To establish our early clinical results of a new total knee arthroplasty (TKA) tibial component introduced in 2013 and compare it to other designs in use at our hospital during the same period. METHODS: This is a retrospective study of 166 (154 patients) consecutive cemented, fixed bearing, posterior-stabilized (PS) TKAs (ATTUNE) at one hospital performed by five surgeons. These were compared with a reference cohort of 511 knees (470 patients) of other designs (seven manufacturers) performed at the same hospital by the same surgeons. There were no significant differences in age, sex, BMI, or follow-up times between the two cohorts. The primary outcome was revision performed or pending. RESULTS: In total, 19 (11.5%) ATTUNE study TKAs have been revised at a mean 30.3 months (SD 15), and loosening of the tibial component was seen in 17 of these (90%). Revision is pending in 12 (7%) knees. There was no difference between the 31 knees revised or with revision pending and the remaining 135 study knees in terms of patient characteristics, type of bone cement (p = 0.988), or individual surgeon (p = 0.550). In the reference cohort, there were significantly fewer knees revised (n = 13, 2.6%) and with revision pending (n = 8, 1.5%) (both p < 0.001), and only two had loosening of the tibial component as the reason for revision. CONCLUSION: This new TKA design had an unexpectedly high early rate of revision compared with our reference cohort of TKAs. Debonding of the tibial component was the most common reason for failure. Additional longer-term follow-up studies of this specific component and techniques for implantation are warranted. The version of the ATTUNE tibial component implanted in this study has undergone modifications by the manufacturer. Cite this article: Bone Joint J 2021;103-B(6 Supple A):137-144.

Fresh Osteochondral Allograft Transplantation for Osteochondral Lesions of the Talus: A Systematic Review.

Osteochondral lesions of the talus (OLTs) are difficult to treat. Despite a multitude of interventions, there are no generally-agreed-upon guidelines regarding treatment. The objective of this study was to conduct a systematic review of clinical outcomes after fresh osteochondral allografts transplantation of the talus. PubMed, the Cochrane Central Register of Controlled Trials, EMBASE, and Medline were searched using PRISMA guidelines. Studies that evaluated outcomes after fresh osteochondral allograft transplantation for OLTs were included. Clinical outcomes, according to standardized scoring systems, such as the American Orthopaedics Foot & Ankle Society (AOFAS) Ankle/Hindfoot Scale and the Visual Analog Scale (VAS) were compared across studies. The literature search yielded 12 eligible studies with a mean Coleman Methodology Score of 68.1 (57-79). A total of 191 patients were included with an average age of 37.5 (17-74) years and average follow-up of 56.8 (6-240) months. The AOFAS Ankle/Hindfoot score was obtained pre- and postoperatively in 6 of the studies and had significant improvements in each (p < .05). Similarly, the VAS pain score was evaluated in 5 studies and showed significant decreases from pre- to postoperatively (p < .05). While there were no reported short-term complications, 21.6% of patients required minor subsequent procedures, most commonly arthroscopic debridement and hardware removal. The aggregate graft survival rate was 86.6%. Based on these findings, osteochondral allograft transplantation for OLTs results in positive outcomes with high rates of graft survival and patient satisfaction at intermediate follow-up.

Cost of Aseptic Revision Total Knee Arthroplasty at a Tertiary Medical Center.

BACKGROUND: Revision total knee arthroplasty (TKA) involves varying levels of case complexity and costs depending on the following: (1) number of components revised, (2) duration of operating room time, and (3) length of hospital stay. However, the cost associated with different types of aseptic TKA revisions, based on number and type of components revised, is not well described. We sought to determine differences in cost associated with different revision types, and to correlate this with average national hospital and surgeon reimbursement based on current Centers for Medicare and Medicaid Services data. METHODS: This is a retrospective review of aseptic revision TKAs performed at a single tertiary referral center from 2015 to 2018. Patient demographic data, operating room time, and direct surgery and total hospital costs obtained from an internal accounting database (Enterprise Performance Systems, Inc) were collected. Patients were stratified by the components revised (polyethylene liner only, tibia only, femur only, or both femur and tibia). We hypothesized that direct surgery and total hospital costs would increase as case complexity increased from poly exchange to single-component revisions and both-component revisions. RESULTS: In total, 106 patients were included (19 poly exchanges, 10 tibia-only revisions, 13 femur-only revisions, and 64 both-component revisions). Operating room time was significantly lower for poly exchange than all other groups (P < .001). Direct surgery and total hospital costs were significantly lower for poly exchange than all other groups (P < .001), and were significantly lower for tibia-only and femur-only revisions compared to both-component revisions (P < .001). Average national surgeon reimbursement by Medicare decreased as a percentage of direct surgery cost as case complexity increased from poly exchange to tibia-only, femur-only, and both-component revisions. Total hospital cost per average Diagnosis Related Group weight was lowest for single-component revisions and highest for both-component revision. CONCLUSION: There are significant differences in cost associated with aseptic TKA revisions based on number and type of components revised. These differences may not be accurately reflected in reimbursement, and often represent a burden to those who treat complex revisions.

All-Polyethylene Tibia: An Opportunity for Value-Based Care in Bundled Reimbursement Initiatives.

Surgeons play a critical role in making cost-effective decisions that maintain high-quality patient outcomes, which is the current focus of the Centers for Medicare & Medicaid Services. All-polyethylene tibial (APT) components often cost less during total knee arthroplasty (TKA). The authors sought to determine the relative cost savings of APT, as well as their effect on 90-day quality outcome metrics. This was a retrospective review of primary TKAs performed at a single tertiary referral center participating in the Comprehensive Care for Joint Replacement model, by 2 surgeons, from 2015 to 2017. Patient demographic data and direct hospital costs were collected, and patients were stratified by APTs vs metal-backed components. Univariable and multivariable analyses were performed for all outcome metrics. A total of 188 primary TKAs were included (92 APT, 96 metal-backed). Patients receiving APT components were older (P<.001) and had a lower body mass index (P<.001), but there was no difference in sex or American Society of Anesthesiologists score between groups. Operative time was significantly less (mean, 13 minutes) and direct surgery costs were significantly lower for APTs (P<.001). A multivariable regression model for surgical costs demonstrated significant savings (P<.001), and total hospital cost demonstrated a 6.2% average savings with APT. There was no difference in 90-day emergency department visits or re-admissions. This study demonstrates that the use of an APT is able to significantly affect not only the surgical cost but also the total hospital admission cost while maintaining equivalent 90-day outcome metrics. Strategies like this should be considered in appropriately selected patients as the incidence of TKA continues to expand. [Orthopedics. 2021;44(1):e114-e118.].

The Impact of Preoperative Mental Health and Depression on Outcomes After Total Ankle Arthroplasty.

BACKGROUND: Preoperative mental health and depression have been shown to negatively impact patient-reported outcome measures after a broad array of orthopaedic procedures including total ankle arthroplasty. The hypothesis for this study was that decreased Short Form (SF)-36 Mental Component Summary (MCS) scores will modulate the impact of depression on patient-reported outcome measures after total ankle arthroplasty. METHODS: All patients undergoing primary total ankle arthroplasty between January 2007 and December 2016 who were enrolled into a prospective outcomes study and who had at least 1-year minimum study follow-up were retrospectively reviewed. Patients were separated into 4 groups based on the presence or absence of an SF-36 MCS score of <35 points and diagnosis of depression. SF-36 Physical Component Summary (PCS) and MCS scores, Short Musculoskeletal Function Assessment (SMFA) function and bother components, and visual analog scale (VAS) pain were collected preoperatively and in the 1 to 2-year follow-up. The Wilcoxon rank sum was used to assess differences in outcomes by depression and low preoperative MCS scores. Multivariable models were then constructed to evaluate between-group differences in change scores according to preoperative SF-36 MCS scores and a diagnosis of depression, with adjustment for baseline patient and treatment characteristics. RESULTS: Patients with depression and those with low preoperative MCS scores had significantly worse final outcome scores along with reduced improvement in SF-36 PCS and VAS pain scores compared with patients without these risk factors. Among patients with depression, low preoperative MCS scores helped to differentiate patients with poor final outcome scores. Similarly, in patients with low preoperative MCS scores, depression helped to differentiate patients with poor final outcome scores. CONCLUSIONS: Although patients achieved significant improvements in functional outcomes regardless of cohort, decreased preoperative mental health modulated the impact of depression on outcomes. Patients with diminished preoperative mental health and depression are at an increased risk for sustaining smaller improvements in outcomes. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

A Specific Capsular Repair Technique Lowered Early Dislocations in Primary Total Hip Arthroplasty Through a Posterior Approach.

BACKGROUND: Dislocation is a challenging problem after total hip arthroplasty (THA). We sought to evaluate the incidence of early dislocation with 2 different posterior repair techniques after THA using a posterior approach. METHODS: From September of 2008 to August of 2019, we evaluated 841 THAs performed by a single surgeon using a posterior approach. Before November of 2015, the capsule was repaired to the greater trochanter (group 1, 605 patients). Starting November 2015, the posterior capsule was repaired in a side-to-side fashion (direct soft-tissue repair) (group 2, 236 patients). There was a mean follow-up of 31.1 months (range, 2.5-122.5 months). A multivariable logistic regression model was constructed to assess the impact of baseline patient and operative factors on the dislocation rate. RESULTS: There were 22 dislocations, all of which occurred in group 1. There were no dislocations in group 2. After adjusting for patient and operative factors, the direct soft-tissue repair had a large impact on the overall multivariable model as indicated by its effect likelihood ratio of 10.33 (P = .001); however, the odds ratio was not calculable for this factor, given that there were no dislocations in hips with direct soft-tissue repair. Increasing age was associated with an increased odds of dislocation (odds ratio, 1.04, P = .017), with an effect likelihood ratio of 6.25 (P = .012). CONCLUSIONS: Switching from a capsular repair to the greater trochanter to a side-to-side capsular repair was associated with a decreased rate of dislocation in primary THA through a posterior approach.

Comparison of 3D Printed Spherical Implants versus Femoral Head Allografts for Tibiotalocalcaneal Arthrodesis.

Successful tibiotalocalcaneal (TTC) arthrodesis can be difficult to achieve in patients with bulk bone defects even with the use of femoral head allograft. Retrograde intramedullary nail placement through custom 3-dimensional (3D) spherical implants is an innovative option for these patients. The purpose of this study was to compare fusion rates, graft resorption, and complication rates between patients undergoing TTC fusion with 3D sphere implants versus femoral head allografts. Patients who underwent TTC arthrodesis with an intramedullary nail along with a 3D spherical implant (n = 8) or femoral head allograft (n = 7) were included in this study. The rate of successful fusion of the tibia, calcaneus, and talar neck to the 3D sphere or femoral head allograft was compared between the groups. The rate of total fused articulations was significantly higher in the 3D sphere group (92%) than the femoral head allograft group (62%; p = .018). The number of patients achieving successful fusion of all 3 articulations was higher in the 3D sphere group (75%) than the femoral head allograft group (42.9%, p = .22). The rate of graft resorption was significantly higher in the femoral head allograft group (57.1%) than the 3D sphere group (0%, p = .016). There were no significant differences between the groups in terms of complications. These data demonstrate that the use of a custom 3D printed sphere implant is safe in patients with severe bone loss undergoing TTC arthrodesis with a retrograde intramedullary nail and may result in improved rates of successful arthrodesis.

Patient Characteristics of Possible Responders and Nonresponders to Total Ankle Arthroplasty.

BACKGROUND: Characteristics of responders, or those who achieve a clinical improvement above the level of a minimal clinically important difference, have not been defined for total ankle arthroplasty (TAA). The purpose of this study was to determine patient characteristics that distinguish possible responders from possible nonresponders after TAA using criteria established for other arthroplasty surgeries. METHODS: Patients undergoing TAA who were enrolled into a prospective study at a single academic center evaluating patient-reported outcomes were included. Patients were characterized as possible responders if the relative or absolute improvement in their 2-year follow-up Short Musculoskeletal Function Assessment (SMFA) function score was at least 50% or 20, respectively, compared with their preoperative score, consistent with Outcome Measures in Rheumatoid Arthritis Clinical Trials and the Osteoarthritis Research Society International (OMERACT-OARSI) responder criteria. Patient factors were then associated with possible responder or nonresponder status and a multivariable analysis was performed. A total of 491 patients with complete data and 2-year follow-up were included in this study. RESULTS: Multivariable analysis demonstrated that a higher baseline 36-Item Short-Form Survey (SF-36) mental component summary (MCS) score (OR [95% CI], 1.02 [1.01, 1.04]; P = .003), indicating better mental health, was associated with being a possible responder to TAA. The presence of rheumatic disease (OR [95% CI], 0.38 [0.22, 0.67]; P = .001) was a significant predictor of being a possible nonresponder. CONCLUSION: Our data reveal that a higher baseline SF-36 MCS score was associated with increased improvement in SMFA function scores, while rheumatic disease was associated with worse improvement in SMFA function scores after TAA. Patients with rheumatic disease or poor mental health may not achieve as favorable results after TAA and should be counseled appropriately. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Results of Tibia and Fibula Osteotomies Performed Concomitant to Total Ankle Replacement.

BACKGROUND: Neutral ankle alignment along with medial and lateral support are paramount to the success of total ankle replacement (TAR). Fibula, intra-articular medial malleolus, and supramalleolar tibia osteotomies have been described to achieve these goals; however, the literature is scant with outcomes and union rates of these osteotomies performed concomitant to TAR. The purpose of this study was to describe our results. METHODS: A retrospective review was performed to identify patients who had a concomitant tibia, fibula, or combined tibia and fibula osteotomy at the same time as TAR. Routine radiographs were used to assess osteotomy union rates and changes in alignment. Outcomes questionnaires were evaluated preoperatively and at most recent follow-up. Twenty-six patients comprising 4% of the total TAR cohort were identified with a mean follow-up of 3.9 years. RESULTS: There were 12 combined tibia and fibula osteotomies, 9 isolated tibia osteotomies, and 5 isolated fibula osteotomies. The union rate for these osteotomies was 92%, 100%, and 100%, respectively. Mean coronal alignment improved from 15.2 to 2.1 degrees (P < .001). There was significant improvement in patient-reported outcome scores, including Short Form-36, Short Musculoskeletal Function Assessment, and visual analog scale pain. There was 1 failure in the study. CONCLUSION: These data demonstrate successful use of tibia, fibula, or combined tibia and fibula osteotomies at the same time as TAR in order to gain neutral ankle alignment. The overall union rate was 96% with significant improvement in alignment, pain, and patient-reported outcomes. We believe concomitant osteotomies can be considered a successful adjunctive procedure to TAR. LEVEL OF EVIDENCE: Level III, retrospective comparative series.

Does facility volume influence survival in patients with primary malignant bone tumors of the vertebral column? A comparative cohort study.

BACKGROUND CONTEXT: Facility volume has been correlated with survival in many cancers. This relationship has not been established in primary malignant bone tumors of the vertebral column (BTVC). PURPOSE: To investigate whether facility patient volume is associated with overall survival in patients with primary malignant BTVCs. STUDY DESIGN: Retrospective comparative cohort. PATIENT SAMPLE: Adult patients with chordomas, chondrosarcomas, or osteosarcomas of the mobile spine. OUTCOME MEASURES: Five-year survival. METHODS: We retrospectively analyzed 733 patients with primary malignant BTVCs in the national cancer database from 2004 through 2015. Univariate and multivariate analyses were used to correlate specific outcome measures with facility volume. Volume was stratified based on cumulative martingale residuals to determine the inflection point of negative to positive impact on survival based on the patient cohort. Long-term survival was compared between patients treated at high and low volume using the Kaplan-Meier method. Only patients with malignant primary tumors were considered eligible for inclusion; patients with incomplete treatment data or benign tumors were excluded. RESULTS: Patients treated at high-volume centers (HVCs) were younger (p=.0003) and more likely to be insured (p<.0001). There were no significant differences in tumor characteristics. Patients treated at high-volume facilities had improved 5-year survival of 71% versus 58% at low-volume centers (p<.0001). Patients treated at HVCs were more likely to receive surgical treatment (91% vs. 80%, p<.0001); if surgery was performed, they were more likely to undergo an en bloc resection (48% vs. 30%, p<.0001). However, there were no differences in margin status or utilization of radiotherapy or chemotherapy between HVCs and low-volume centers. In a multivariate analysis, facility volume was independently associated with improved survival overall (HR 0.75 [0.58-0.97], p=.03). CONCLUSIONS: Primary malignant BTVCs are rare, even for HVCs. Despite this, patient survival was significantly improved when treatment was performed at HVCs.

Surgeon-Performed High-Dose Bupivacaine Periarticular Injection With Intra-Articular Saphenous Nerve Block Is Not Inferior to Adductor Canal Block in Total Knee Arthroplasty.

BACKGROUND: Periarticular injection or anesthesiologist-performed adductor canal block are commonly used for pain management after total knee arthroplasty. A surgeon-performed, intra-articular saphenous nerve block has been recently described. There is insufficient data comparing the efficacy and safety of these methods. METHODS: This is a retrospective two-surgeon cohort study comparing short-term perioperative outcomes after primary total knee arthroplasty, in 50 consecutive patients with surgeon-performed high-dose periarticular injection and intra-articular saphenous nerve block (60 mL 0.5% bupivacaine, 30 mL saline, 30mg ketorolac) and 50 consecutive patients with anesthesiologist-performed adductor canal catheter (0.25% bupivacaine 6 mL/h infusion pump placed postoperatively with ultrasound guidance). Chart review assessed pain scores through POD #1, opioid use, length of stay, and short-term complications, including local anesthetic systemic toxicity. Statistical analysis was performed with two-tailed Student's T-test. RESULTS: The high-dose periarticular injection cohort had significantly lower pain scores in the postanesthesia care unit (mean difference 1.4, P = .035), on arrival to the inpatient ward (mean difference 1.7, P = .013), and required less IV narcotics on the day of surgery (mean difference 6.5 MME, P = .0004). There was no significant difference in pain scores on POD #1, total opioid use, day of discharge, or short-term complications. There were no adverse events related to the high dose of bupivacaine. CONCLUSION: Compared with postoperative adductor canal block catheter, an intraoperative high-dose periarticular block demonstrated lower pain scores and less IV narcotic use on the day of surgery. No difference was noted in pain scores on POD #1, time to discharge, or complications. There were no cardiovascular complications (local anesthetic systemic toxicity) despite the high dose of bupivacaine injected. LEVEL OF EVIDENCE: III.

Comparison of Tibiotalocalcaneal Arthrodeses Using a Sustained Dynamic Compression Nail Versus Nondynamized Nails.

Background. Tibiotalocalcaneal (TTC) arthrodesis is a common treatment option for hindfoot arthritis and deformity. Loss of compression over time with statically locked nails may contribute to nonunion. A novel retrograde intramedullary nail with an internal pseudoelastic component has recently been used to provide sustained dynamic compression (SDC). The purpose of this study was to compare fusion rates and time to union between the SDC and nondynamized (ND) nails. Methods. All patients who underwent TTC arthrodesis with an intramedullary nail at a single institution from 2013 to 2017 and who had at least 1 year of follow-up were included in this study. Baseline patient and operative characteristics were collected and compared between the sustained SDC and ND nail groups. The rate of successful fusion, time to union, and complications were compared between the groups. Results. The SDC cohort had a significantly faster time to union by 3.9 months (P = .049). The SDC cohort had a higher fusion rate (78.0%) compared with the ND nail cohort (75.0%), although this was not statistically significant (P = .75). The SDC nail was used significantly (P < .05) more often in patients with known risk factors for nonunion, including female sex, smoking, revision surgery, prior trauma, and patients requiring 3D cage implants for significant bone loss. There were no differences between the groups in terms of complications. Conclusion. The SDC nail has been shown to achieve successful arthrodesis in a population at high risk for nonunion, using less hardware, and at a faster rate than ND nails. Level of Evidence: Level III: Retrospective, comparative study.

Tibiotalocalcaneal Arthrodesis Using a Novel Retrograde Intramedullary Nail.

Background. Tibiotalocalcaneal (TTC) arthrodesis is a common treatment option for complex hindfoot pathology. Overall union rates range from 50% to 86% but can be even lower in certain populations. A novel retrograde intramedullary nail has recently been developed. The purpose of this study was to report fusion rates, time to weight-bearing, and complications with the use of the A3 Fusion Nail. Methods. All patients 18 years or older who underwent TTC arthrodesis with an A3 Fusion Nail at a single institution from 2010 to 2015 with a minimum 3-month follow-up were included in this study. Rates of successful fusion, time to union, time to weight-bearing, and complications were evaluated. A total of 20 patients with an average age of 58.1 years and an average follow-up of 12.5 months met inclusion criteria. Results. Successful TTC arthrodesis was achieved in 14 of 20 patients (70%) overall. Average time to union was 8.1 months, and average time to weight-bearing was 6.8 weeks. Of 20 patients, 17 (85%) required femoral head allograft for bulk bone defects, and the union rate in this subset of patients was 76.5%. The rates of revision surgery (10%) and complications were low. Conclusion. The A3 Fusion Nail demonstrated a favorable safety profile and achieved TTC arthrodesis at a rate consistent with historical data despite being used in a patient population at high risk for nonunion. In patients with bulk bone defects at high risk for nonunion, the A3 Fusion Nail demonstrated superior rates of fusion (76.5%) to those reported in the literature (50%).Level of Evidence: Level III: Retrospective cohort study.

Use of Patient-Specific 3D-Printed Titanium Implants for Complex Foot and Ankle Limb Salvage, Deformity Correction, and Arthrodesis Procedures.

BACKGROUND: The advancement of 3D printing technology has allowed for the use of custom-designed implants for difficult-to-treat foot and ankle pathologies. This study reports on the radiographic and functional outcomes of a case series of patients treated with patient-specific 3D-printed titanium implants. METHODS: Fifteen consecutive patients treated with custom-designed 3D-printed implant cages for severe bone loss, deformity correction, and/or arthrodesis procedures were included in this study. A minimum of 1 year of clinical and radiographic follow-up was required. No patients were lost to follow-up. Patients completed a visual analog scale for pain, the Foot and Ankle Ability Measure Activities of Daily Living score, and the American Orthopaedic Foot & Ankle Society Score outcomes questionnaires preoperatively and at most recent follow-up. All patients had postoperative radiographs and computed tomography (CT) scans to assess bony incorporation. The mean age was 53.3 years (range, 22-74 years) with a mean follow-up of 22 months (range, 12-48 months) for these 15 patients. RESULTS: Radiographic fusion verified by CT scan occurred in 13 of 15 patients. There was significant improvement in pain and all functional outcome score measures. All patients who went on to fusion were satisfied with their surgery. There were 2 failures, consisting of 1 infection and 1 nonunion, with an overall clinical success rate of 87%. CONCLUSION: These patients demonstrated the successful use of patient-specific 3D-printed titanium implants to treat complex large bony defects, deformities, and arthrodesis procedures. These implants offer surgeons a novel and promising approach to treat both lower extremity pain and deformity that is not always available with current techniques. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Efficacy of Particulated Juvenile Cartilage Allograft Transplantation for Osteochondral Lesions of the Talus.

BACKGROUND: Particulated juvenile cartilage allograft transplantation (PJCAT) is a novel treatment option for osteochondral lesions of the talus (OLTs). It is typically employed as a salvage procedure after initial debridement and microfracture has failed as it is theorized to deliver viable hyaline cartilage. We hypothesized that PJCAT would be a safe and effective treatment option for OLTs. METHODS: This is a retrospective case-control study of patients who underwent PJCAT for the treatment of OLTs at a single academic institution. Failure of the procedure was defined as no change or worsening of symptoms and/or the need for a subsequent cartilage restoration procedure. Variables recorded included preoperative magnetic resonance imaging (MRI) area and volume, intraoperative size, etiology, lesion location, sex, age, body mass index (BMI), history of prior surgery, American Orthopaedic Foot & Ankle Society score, and foot and ankle outcome score. Fifteen patients completed a minimum of 12 months of follow-up (mean, 34.6 months). RESULTS: The failure rate of PJCAT in this series was 40% (6/15). Preoperative MRI area and intraoperative OLT size along with male sex were predictive of failure ( P < .05). Age, BMI, etiology, technique (open vs arthroscopic), history of prior surgery, and location of lesion were not predictors of failure in this limited series ( P > .05). Patients with lesions greater than 125 mm2 area had a significant increased risk of clinical failure ( P < .05). Functional outcome scores were significantly better at final follow-up in the patients who had undergone successful treatment vs those who did not. CONCLUSION: These findings demonstrate the association of preoperative MRI lesion area, intraoperative lesion size, and male sex as risk factors for failure of PJCAT setting of an already difficult to treat pathology. LEVEL OF EVIDENCE: Level IV, retrospective case series.

The Value of Motion: Patient-Reported Outcome Measures Are Correlated With Range of Motion in Total Ankle Replacement.

BACKGROUND: The proposed benefit of total ankle replacement (TAR) over ankle fusion is preserved ankle motion, thus we hypothesized that an increase in range of motion (ROM) is positively correlated with validated patient-reported outcome measures (PROMs) in individuals receiving TAR. METHODS: Patients undergoing TAR at a single academic medical center between 2007 and 2013 were evaluated in this study. In addition to a minimum of 2-year follow-up, complete preoperative and postoperative outcome measures for the Foot and Ankle Disability Index (FADI), Short Musculoskeletal Function Assessment (SMFA) Bother and Function Indices, Visual Analog Scale (VAS), and 36-Item Short Form Health Survey (SF-36) were requisite for inclusion. Standardized weightbearing maximum dorsiflexion and plantarflexion sagittal radiographs were obtained and previously described ankle and foot measurements were performed to determine ankle ROM. RESULTS: Eighty-eight patients met inclusion criteria (33 INBONE, 18 Salto-Talaris, 37 STAR). Mean time to final ROM radiographs was 43.8 months (range 24-89 months). All aforementioned PROMs improved between preoperative evaluation and most recent follow-up ( P < .01). Final ankle ROM was significantly correlated with postoperative FADI, SF-36 Mental Component Summary (MCS), SMFA Bother and Function Indices, and VAS. Additionally, dorsiflexion was positively associated with FADI, SF-36 MCS, and SMFA Function ( P < .05) but plantarflexion had no such influence on outcomes. No differences were identified with subset stratification by prosthesis type, fixed versus mobile-bearing design or etiology. CONCLUSION: In this TAR cohort with prospectively collected outcomes data, radiographic sagittal plane ankle motion was positively correlated with multiple PROMs. Disease-specific and generic health-related quality of life PROMs demonstrated improvement postoperatively in all domains when evaluating final total range of motion. Patients who undergo TAR for end-stage osteoarthritis with improvement in ROM demonstrate a direct correlation with improved patient-centric metrics and outcome scores. LEVELS OF EVIDENCE: Level III: Retrospective comparative study.